Equipment Found

Item is a used, WEXXAR, fully automatic, hot melt case erector.. Machine utilizes patented pin/dome system, no vacuum utilized on the forming jaws for positive carton squaring. Machine is equipped with a Nordson Pro Blue hot melt glue system. Case range 7.25" x 18" long, 7.25" x 14" wide, 6" x 15" deep. Machine run tested. Machine is rated at up 20 CPM depending on carton size and board characteristics. Power requirement is 230 volt, 3 phase.

It is a used Delkor model TFS (Trayfecta S series) former. The machine is capable of forming trays, cartons, and cases depending on application. Machine was manufactured in late 2015 and installed in 2016. It is equipped with a Nordson ProBlue 10 hot melt glue system. This is a single head machine capable of up to 55 cycles per minute depending on application. Tool-less changeover (manufacturer states changeover can be accomplished in 3 minutes). S/S construction. Power requirement is 480 volt/3-phase and requires 15 SCFM @ 80 PSI when operating at full capacity.

Item is a used, Best Pack, semi-automatic top/bottom case taper. Machine is equipped with side belt drive, and top only, 2" tape head. 120 volt single phase power requirement

Item is a used, Hartness, model 825, fully automatic, drop style case packer. This is an all S/S machine set up for 460 volt/3-phasee operation. The machine was previously operating in a bottled water facility and has multiple grid sets, primarily 3 x 4 pack pattern. Carton and container flow is in the same direction. Includes double wide 7 1/2 wide chain by 7' conveyor side rtransfer to the packer.

Irtem is a used, BelCor model 505 - GS Versa Pack, pneumatic case erector. Power requirement is 120 volt/1-phase/60 hz. The BelCor 505 pack station requires compressed air.

Item is a used, Elliott, hot melt, top only case sealer model 76-10 custom. The machine is equipped with a Nordson Prolblue glue system and Saturn right angle nozzles. The infeed end of the machine is fitted with a case elevator, case infeed indexer, and case pusher. The machine was set up for bag-in-box sealing but can be adapted to standard case. The machine is rated at a maximum of 1,400 CPH. Equipped with OSHA gusarding and door interlocks. Integral PLC control panel located right side of machine - 460 volt/3-phase/60 hz

Item is a used, Elliott, hot melt, top only, automatic case sealer. It is a model HMT Mini 79-10-10. It is equipped with a Nordson ProBlue glue system. Case size range is 8"x18" L; 6"x16" W; 3"x16" H. Machine is rated at 1,400 CPH. Machine is equipped with OSHA guarding with door interlocks. Machine mounted electrical panel - 460-230/3-phase/60 hz.

Item is a used, WEXXAR model WFT, case erector/bottom taper. The machine is equipped with a 2" tape head. Machine is capable of speeds of up to 20 CPM. It has a formed case size range of 7" to 22" (L) x 6" to 17"(W) x 6" to 20" (H). Utilizes pin/dome pick up method (no vacuum). It is currently set up for 208 volt/3 phase electrics.