Equipment Found

Item is a used, Federal, rotary filler model GWSS5/216L 768. The machine has 21 - 1 1/8" filling valves on 6.98" centers, and 6 screw capping chucks set up for 38mm screw cap. Machine has 3-pin change parts system. Included is the Federal "pin dial" style sorter and reservoir level control system. The machine operates with counter-clockwise rotation and is equipped with a container feedscrew for timing. Machine is equipped with powered bowl height adjustment as well as C.I.P. ring. It has a 4 1/2" through conveyor. Machine is all S/S construction and previous use was in dairy application.

Item is a used, semi-automatic, single station piston filler. Piston is pneumatically driven. Fill capacity 89s 25-100ml. Machine can be cycled with a foot switch or run in full automatic mode. This is a bench top machine. Included is the hopper/reservoir. Power requirement is 120 VAC

Item is a used, Simplex, 4 head, automatic, injline, filler. The machine is equipped with 4 11/16" filling nozzles and a pneumatic container indexing system. This is a pressure overflow system with a return tank and product supply pump to the nozzles. This is a frame mounted machine with an integral 10' long conveyor. Previous use was in a liquor bottling facility. Power requirement is 230 volt/3 phase/ 50 hz.

Item is a used 4 head stainless bottle filler set up on a stainless stand with reservoir and small pump. New cost is $1995. This machine was used vary sparingly in a winery and is in very good shape.

Item is a used Elmar rotary piston filler. This is a 14 station machine with counter-clockwise rotation with tangential discharge. Machine has feedscrew infeed w/no container/no fill mechanism. Container diameter range is from 2 1/8" to 4 1/4". Minimum-maximum fill capacity with the existing pistons/cylinders is 1.5 - 13 fluid oz. The filler bowl capacity is 25 gallons. Piston size is 1 7/8" x 11". S/S base. Previous use was in food facility.

Item is a NEW STOCK, semi-automatic, single station, 100 ml to 1,000 ml, table top, piston filler. Machine has stainless steel hopper.

Item is NEW STOCK, single station, semi-automatic, bench top, piston filler capable of 50-500 ml fills. Machine requires compressed air and 120 volt power. The container is placed under the nozzle and the cycle is initiated with a foot or hand switch. There is an automatic mode on the machine eliminating the need to initiate each cycle if the fills are large enough to give the operator time to transfer containers during the back-stroke of the piston. A hopper/reservoir is included with the machine as well as a hose to connect to an elevated product source.

Item is NEW STOCK, single station, semi-automatic, pneumatic piston filler. Machine is capable of 5-100 ml fills. Operates on compressed air and 120 volt single phase power.