Equipment Found

Item is a used, 400 galon, S/S, single wall, tank. Tank has top manway with center/bottom discharge (slight cone) and is 2" Tri-Clamp. Approximate dimensions are 3'9" diameter with a 5' straight side. The four S/S legs are approx. 2' tall. Tank has an attached S/S ladder on one side.

Item is a used 20 bbl conical fermenter. The tank appears to be built by Specific Mechanical and includes jacketed sidewall, side manway door, cip, and racking port. The tank was used in a brewery and although there are signs that the jacket has been repaired, it holds pressure and is functional as intended.

Item is a used, 4,110 liter (1,085 gallon) single wall, open top tank with side/bottom manway, slope bottom, on s/s legs (2 available.

Item is a used 4,110 Liter (1,085 Gallon), single wall, open top tank with side/bottom manway, with slope bottom, and S/S legs. (2 available).

(2 AVAILABLE) Item is a used, 1,500 gallon, S/S, single wall fermenter. Tank is equipped with 4 S/S legs, side/bottom manway, slope bottom with 2"total discharge, 2" racking port, temp. port, sample port, and fittings for level gauge.

(2 AVAILABLE) Item is a used, S/S, 1,500 gallon, open top, single wall, fermenter. Tank is equipped with four S/S legs, side manway, slope bottom with 2" total discharge, 2" racking port, temp port, sample port, and fittings for level gauge. Tanks include "garbage can" style lids (with rim to hold in p-lace and handles to remove).

Item is a new stock Letina jacketed variable capacity fermenter. Specifications are as follows: — volume approx. 3050 lit — coat diameter 1402 mm, height 2000 mm — total height approx. 2850 mm — 3 legs, height 400 mm, closed — flat bottom, 5% inclined — floating lid with inflatable tube and pump — breath valve, DIN 50 — lifting arm — hand winch — lifting lugs — ladder support — type plate with note card — thermometer, analog — sample tap, DIN 15 — level indicator, dia. 16 mm, scaled, open — manway door, rectangular, 440 x 560 mm, mod. 1500 — cooling jacket, 1.5 m2, max. 2.5 bar — thermowell — partial discharge, ball valve, DIN 50 — total discharge, ball valve, DIN 50, adapter TC 2" — material AISI 304, BA, mirror inside, circle brushed outside — packaging

Item is a used stainless steel single wall mix tank. The tank is mounted to a fork-liftable stainless skid with fork pockets and has been modified with a hinged lid on top and a top mounted Lightnin agitator with dual, 3-blade props.. The tank has a side manway that has been permanently welded shut. There is a tri clamp fitting on the bottom with a1 1/2" S/S ball valve. Two internal baffles have been welded to the inner sidewall of the tank. All contact parts are stainless steel and the mixer is .5hp/60hz/3ph/230v/1725rpm. The VFD speed controller is set up to allow the mixer to run on single phase power. VFD mounted in "seal-tite enclosure. Dimensions are approx. 88" tall to top of the mixer and 44" diameter. This vessel is in very good condition