Equipment Found

Item is a fabricated from used parts, Bi-Flow dump table (approximately 4' wide by 7' long. Machine is designed to single file round, cylinder bottles from a dump station table. It consists of multiple table-top chain lanes with one lane reversing.

New Stock Letina 7932 Gal/3000L jacketed mix tank with wheels - — mixtank — volume approx. 3000 lit — coat diameter 1593 mm, height 1500 mm — total height approx. 2200 mm — on wheels — folding cover — conical off-centered bottom — gearmotor 2.2 kW — shaft with blade paddles — baffle — type plate with note card — cooling jacket, 1.5 m2, max. 2.5 bar, u-shape style — thermowell — total discharge, butterfly valve, TC 1.5" — material AISI 304, BA, mirror inside, circle brushed outside — packaging

Item is a used, Wright model 0340, positive displacement pump having a rectangular flange intake. This is a sanitary, all S/S model. It is powered with a 3HP SEW motor with gear reduction. The entire motor/pump assembly is mounted on S/S base. 230/460 volt - 3 phase power.

Item is a used, REB, model IVS-6-Gallon piston filler. Machine is fully automatic. It was manufactured in 2016 an was previously utilized in a food factory running mayonaise. All contact parts are S/S or food grade plastic.. The rotary valves and the piston drive are powered by on-board hydraulic unit. The nozzles are impingement type with pneumatic heads that raise and lower to allow penetration of the container. The machine is equipped with a 10' long by 4 1/2" wide integral conveyor with a pneumatic, container indexing system. Filling nozzles are 1 1/8" diameter. The product reservoir is approximately 12" x 5' x 20".

Item is a used, WEXXAR, fully automatic, hot melt case erector.. Machine utilizes patented pin/dome system, no vacuum utilized on the forming jaws for positive carton squaring. Machine is equipped with a Nordson Pro Blue hot melt glue system.

It is a used Delkor model TFS (Trayfecta S series) former. The machine is capable of forming trays, cartons, and cases depending on application. Machine was manufactured in late 2015 and installed in 2016. It is equipped with a Nordson hot melt glue system. This is a single head machine capable of up to 55 cycles per minute depending on application. Tool-less changeover (manufacturer states changeover can be accomplished in 3 minutes). S/S construction. Power requirement is 480 volt/3-phase and requires 15 SCFM @ 80 PSI when operating at full capacity.

Item is a used, Mat-top, single direction accumulation table. Approximate dimensions are 5' deep X 5'6" wide. Frame is all S/S construction and is equipped with transfer fingers at each end for perpendicular transfer to or from single lane conveyors. Belting appears to be in excellent condition with no visible nicks. Previous use was brewery in between can filler and labeler.

Item is a previously owned, but believed UNUSED, (still has original tags) SPX/Waukesha, positive displacement pump head model 030U2. Pump is configured with 1 1/2" clamp style ports. Pump ONLY-NO MOTOR