Equipment Found

Item is a used, WS Packaging, model Roll-Tac 300 pressure sensitive labeler. The machine is currently set up for a spot/flat panel application.Labeling head is mounted on a "X-Y" axis and is capable of tilt. All motor components in the labeling head are "stepper" type. It is mounted on a "T" base stand. It can apply up to a 6 1/2 inch high label and is set up for a #4 wind. Also included with the machine is he powered, opposite side stabilizer belt. Original placement was in dairy application.

Item is a used, Ketan model LR-290R, pressure sensitive, wrap around labeler. Machine was manufactured in 2018. The wrap system utilizes a 3 point pinch (3 rollers) to apply labels to straight sided, cylinder containers. It can label products from 0.5" - 6" in diameter. The smallest would be a container that can stand on a conveyor without falling over. Machine can accommodate up to a 6 1/2" tall label. Machine is set up with a variable speed container interval disk. Machine is set up for a #3 wind. Power requirement is 120 volt/single phase.

Item is a used, Ketan model LR-290R, pressure sensitive, wrap around labeler. Machine was manufactured in 2018. The wrap system utilizes a 3 point pinch (3 rollers) to apply labels to staight sided, cylinder containers. Machine is set up with a variable speed container interval disk. Machine is set up for a #3 wind. Power re

Item is a used, Inline Labeling model 1000 pressure sensitive labeler. The machine is designed to apply a wrap label to a straight sided, cylinder container. It is configured for a #3 wind and can apply a label up to 4 1/2 inches high. It is equipped with an inline , interval timing wheel and utilizes 120 volt, single phase power. Previous use was brewery application.

Item is a used, Krones model Canmatic, 10 station, hot melt labeler. The machine is in very good operational condition and will be removed from service January 2019. It is clockwise rotation and has the Krones glue application system. There are several sets of change parts and label magazines for jars ranging is size from 2" to 3" in diameter. Machine is currently set up for 460 volt power. Machine was manufactured in 1997 and purchased new by present owner. The reason for disposal is they lost a packaging contract run with this labeler.

Item is a New Stock, Pack Leader model ELF 50 tabletop, wrap labeling machine. This is a table top model, but it is equipped with a 6" wide conveyor and is able to accommodate a 6.3" wide container. Label dispense speed is 52.5'/minute or a maximum of 60 containers per minute. The label spool diameter is 10" with a core diameter of 3". Power requirement is 110/220 VAC, single phase.

Item is a used Label-Aire print and apply, corner wrap label applicator. It is equipped with a SATO printer. This is a stand-alone machine designed to mount next to an existing, powered case conveyor (approximately 4' long). Machine has been reconditioned by the local Label-Aire distributor.

Item is a new Pack Leader PRO-625 front and back pressure sensitive labeler. The machine has the following features: Product Description: The PACK LEADER USA PRO-625 Front and Back Labeler has excellent features including the 12 degree tilt base head mounts to label tapered side panels. The standard PRO-625 will include labeling heads, servo driven top hold down product stabilizer, product separator and chain aligners. The PRO-625 is constructed of stainless steel and state-of-the-art Delta color touch screen technology. Our pre-delivery inspection confirms proper set-up and functionality, ensuring every machine is set up to your specific application. Product Application: The PACK LEADER USA PRO-625 Front and Back Labeler applies pressure sensitive labels on a wide range of filled or unfilled containers. The PRO-625 is stepper driven and can deliver speeds of 150 PPM. The electronic Delta color touch screen control facilitates fast changeover from product to product and has port memory for selection and set-up. Each application differs in regard to label placement, product size and shape, label size and shape. Specs Type of Labels – Front and Back Maximum Label Size – H 178mm x L 305mm (7in x 12in) Maximum Container Width – 191mm (7.5in) Range of Container Height – 6.5mm – 318mm (0.25in – 12.5in) Conveyor Belt Width – 152mm (6in) Voltage – 110/220 VAC 50/60 HZ 1 Phase 30AMP Power in KW – .1320 Controls – Delta Color Touch Screen Maximum Dispensing Speed – 40m/min (131.2ft/min) Maximum Conveyor Speed – 40m/min (131.2ft/min) Spool Diameter – 356mm (14in) Inner Core – 76mm (3in) Drive – Stepper Motor Dimensions L-W-H– 2845mm x 1829mm x 1429mm (112in x 72in x 56.3in) Net Weight – Approx 300 kgs (750 lbs) Materials – Frame/main components made from #304 stainless steel & anodized aluminum Pricing Series PRO Model 625 - $39,995.00 Crating Charges - $350.00 Additional Options Standard Factory Acceptance Test per Day - $500.00 •All machines require a Factory Acceptance Test (FAT) or start up and training by a Pack Leader USA technician or authorized distributor technician. Wrap Station - $5,950.00 All machines standard are a #4 wind. If a #3 wind is needed, please specify on purchase order. Clear Label Sensor - $1,350.00 Allen Hot Stamp Printer - $6,495.00 Markem-Imaje 32mm X40 Thermal Transfer - $10,950.00 Markem-Imaje 53mm X40 Thermal Transfer - $11,650.00 Recommended Spare Parts Kit (20% savings vs. buying separately) - $1,215.06 •Spare Parts Kit pricing subject to machine specializations/modifications Type (per character) - $12.00 Black Ribbon (per roll) - $12.00 Service Utilities: The labeling system has been designed to provide optimum performance using 110vac, 60hertz, and single-phase current supply. Voltage should be maintained within normal limits of + 10 volts for best results. Cancellation of Order: If an order is cancelled after down payment is received and processed, a 25% restock fee will be applied. Lead Time 4-6 weeks