Equipment Found

Item is a used, Simplex, 4 head, automatic, injline, filler. The machine is equipped with 4 11/16" filling nozzles and a pneumatic container indexing system. This is a pressure overflow system with a return tank and product supply pump to the nozzles. This is a frame mounted machine with an integral 10' long conveyor. Previous use was in a liquor bottling facility. Power requirement is 230 volt/3 phase/ 50 hz.

Item is a used, Elliott, hot melt, top only, case sealer model 76-10 Custom. The machine is equipped with a Nordson Problue glue system and Saturn right angle nozzles. The infeed end of the machine is fitted with a case elevator, case infeed indexer, and case pusher. The machine was set up for bag-in-box sealing but can be adapted to standard case.The machine is rated at 1,400 CPH. It is equipped with OSHA guarding and door interlocks. Integral PLC control panel (located on left side of machine) - 460 vole/3-phase/60 hz

Item is a used, Elliott, hot melt, top only case sealer model 76-10 custom. The machine is equipped with a Nordson Prolblue glue system and Saturn right angle nozzles. The infeed end of the machine is fitted with a case elevator, case infeed indexer, and case pusher. The machine was set up for bag-in-box sealing but can be adapted to standard case. The machine is rated at a maximum of 1,400 CPH. Equipped with OSHA gusarding and door interlocks. Integral PLC control panel located right side of machine - 460 volt/3-phase/60 hz

Item is a used, Quadrell, model Econoline Q-65, automatic wrap labeler. Machine is designed to apply a wrap label to a round, cylinder container. The machine was manufactured in November of 2018. It is set up for a #3 label wind. Power requirement is 120 VAC/single phase. Previous use was labeling beer cans/bottles.

Item is a used, Quincy NW, 75 HP rotary screw compressor. This is a water cooled machine. Radiator included. Air receiver tank is not included in the price, but can be provided at additional cost.

Item is a used Elmar rotary piston filler. This is a 14 station machine with counter-clockwise rotation with tangential discharge. Machine has feedscrew infeed w/no container/no fill mechanism. Container diameter range is from 2 1/8" to 4 1/4". Minimum-maximum fill capacity with the existing pistons/cylinders is 1.5 - 13 fluid oz. The filler bowl capacity is 25 gallons. Piston size is 1 7/8" x 11". S/S base. Previous use was in food facility.

Item is a used, LeRoi, model TRU 7.5A, reciprocating, 5 HP compressor. Operating electrics are 208/230/460 volt 3 phase. Compressor is mounted on an 80 gallon vertical air receiving tank. Included with the compressor is the motor contactor and electrical disconnect.

Item is a NEW STOCK, semi-automatic, single station, 100 ml to 1,000 ml, table top, piston filler. Machine has stainless steel hopper.