Equipment Found
You searched for:
category Petro - Case Handling
Image | Item # | Name | Category | |
---|---|---|---|---|
![]() |
7937 | SWF/McDowell Case erector | Winery, Water, Pharma, Petro, Food, Brewing, Beverage | more info |
Item is a used SWF/McDowell automatic, hot melt, case erector. The machine utilizes a Nordson hot melt glue system. Min/Max case range is 5.75" L X 5.75" W X 10" H / 24" L X 24" W X 33" H. Machine is rated at up to 30 CPM depending on size and board characteristics. Machine dimensions are 88" long, X 68" wide X 64" high. Push button controls. Power requirement is 480 volt/3-phase/60 htz.. |
||||
![]() |
7933 | RA Pearson CE 35 Case Erector | Winery, Pharma, Petro, Food, Brewing, Beverage | more info |
Item is used, RA Pearson model CE 35, automatic, hot melt case erector. The machine is rated at up to 35 cases per minute depending on board characteristics and size Machine was manufactured in 2007. It is equipped with a Nordson ProBlue 10 glue system. MIN/MAX case size 6" X 23.5" L - 5" X 16" W - 3.5" X 18.5" H. Compact footprint machine. It is equipped with a 6' carton magazine. Power requirement is 460 volt/3 pahese/60 hrz. |
||||
![]() |
7884 | SWF McDowell Case Sealer | Winery, Water, Pharma, Petro, Food, Brewing, Beverage | more info |
Item is a used, fully automatic, SWF McDowell, hot melt, case sealer. This is a small foot-print machine measuring approximately 8'6" long. The machine utilizes side and bottom powered belts for case control and is capable of production rates to a maximum of 30 CPM. It is equipped with a Nordson 2304 glue system. OSHA guarding system with Interlock doors. Included with the machine is the 7' long infeed conveyor with the pneumatic case stop for proper timing to the top sealer. |
||||
![]() |
7883 | SWF McDowell Case Erector | Winery, Water, Pharma, Petro, Food, Brewing, Beverage | more info |
Item is a used, SWF McDowell, automatic, hot melt case erector. Min/max case range is 5.75" L x 5.75"W x 10"H / 24"L x 24"W x 33"H. Machine is rated at up to 30 CPM depending on carton size and board characteristics. Machine dimensions are 88" long x 68" wide x 64" high. Push button controls. Machine is equipped with Dynatek hot melt glue system. Some spare maintenance parts included. Power requirement is 230 volt/3-phase/60hz. |
||||
![]() |
7855 | Best Pack Top/Bottom Taper | Winery, Water, Pharma, Petro, Food, Brewing, Beverage | more info |
Item is a used, Best Pack, top/bottom, semi-automatic case taper. The machine is equipped with side belt drive and 2" tape heads. Power requirement is 120 VAC. |
||||
![]() |
7758 | WEXXAR Hot Melt Case Erector | Winery, Water, Pharma, Petro, Food, Brewing, Beverage | more info |
Item is a used, WEXXAR, fully automatic, hot melt case erector.. Machine utilizes patented pin/dome system, no vacuum utilized on the forming jaws for positive carton squaring. Machine is equipped with a Nordson Pro Blue hot melt glue system. Case range 7.25" x 18" long, 7.25" x 14" wide, 6" x 15" deep. Machine run tested. Machine is rated at up 20 CPM depending on carton size and board characteristics. Power requirement is 230 volt, 3 phase. |
||||
![]() |
7721 | Hartness model 825 Case Packer | Winery, Water, Pharma, Petro, Food, Brewing, Beverage | more info |
Item is a used, Hartness, model 825, fully automatic, drop style case packer. This is an all S/S machine set up for 460 volt/3-phasee operation. The machine was previously operating in a bottled water facility and has multiple grid sets, primarily 3 x 4 pack pattern. Carton and container flow is in the same direction. Includes double wide 7 1/2 wide chain by 7' conveyor side rtransfer to the packer.
|
||||
![]() |
7552 | BelCor 505 Case erector | Winery, Water, Pharma, Petro, Food, Brewing, Beverage | more info |
Irtem is a used, BelCor model 505 - GS Versa Pack, pneumatic case erector. Power requirement is 120 volt/1-phase/60 hz. The BelCor 505 pack station requires compressed air. |
Page 1 of 3 out of 24 total items