Equipment Found

Item is a used, Speedaire, 10 HP, industrial grade, compressor. This is a two stage machine. Compressor is mounted on top of an 120 gallon, horizontal ASME rated air receiver tank. Machine was used as a "back-0up" and appears to have had limited use.

Item is a used 140 gallon (537L.) Spartanburg S/S tank. The tank has a dome top w/manway and a cone bottom with a center outlet and clamp style butterfly valve. The tank is mounted on HD casters for portability and includes forklift pockets as well. The tank is rated at 15 psi and would make an excellent tank for carbonating product with the addition of a carbstone.

Item is a used, Admix Model 105RS88S high shear mixer. Mixer is powered with a 7 1/2 HP, S/S motor turning 3,450 RPM. The machine comes with a 3 1/2 foot log shaft and head alnd is currently mounted on a stainless steel tank (approximately 80 gallons). Mixer was manufactured in 2006.

Item is a used, Ketan, bottomless, dual side belt conveyor manufactured in 2018. Machine is all S/S construction is is utilized to facilitate bottom coding of containers.

Item is a used, OAL 48" electrick heat tunnel. 440/480 volt-3 phase power 12.0 KW

NS Letina 1050 Gallon Jacketed Mix Tank On Wheels - Specifications as follows: — mixtank — volume: 4000 lit — coat diameter 1593 mm, height 2000 mm — total height approx. 2700 mm — on wheels — folding cover — conical off-centered bottom — gearmotor 2.2 kW — shaft with blade paddles — baffle — type plate with note card — cooling jacket, 2 m2, max. 2.5 bar, u-shape style — thermowell — total discharge, butterfly valve, tri-clamp 1.5" — material AISI 304, BA, mirror inside, circle brushed outside — packaging

Item is a used, LeRoi, model TRU 7.5A, reciprocating, 5 HP compressor. Operating electrics are 208/230/460 volt 3 phase. Compressor is mounted on an 80 gallon vertical air receiving tank. Included with the compressor is the motor contactor and electrical disconnect.

Item is a used, Waukesha model 015-U1 positive displacement pump manufactured in 2014 .Pump has a built in pressure bypass and clamp style ports. This pump is set up for HAZARDOUS LOCATION operation. Motor, gearbox pump assembly is mounted on a S/S cart. It is powered with a 1 1/2 HP, explosion proof motor mated to a Reeves mechanical vary-drive and 9:1 gear box It is equipped with an A-B hazardous location enclosure for the motor contactor and ON/OFF switch. There is an indicator light on the enclosure to indicate power. The 20' power cord is equipped with a hazardous location plug end as well as a separate, clamp style ground lead.