Equipment Found

Item is a used Elmar rotary piston filler. This is a 14 station machine with counter-clockwise rotation with tangential discharge. Machine has feedscrew infeed w/no container/no fill mechanism. Container diameter range is from 2 1/8" to 4 1/4". Minimum-maximum fill capacity with the existing pistons/cylinders is 1.5 - 13 fluid oz. The filler bowl capacity is 25 gallons. Piston size is 1 7/8" x 11". S/S base. Previous use was in food facility.

Item is NEW STOCK, single station, semi-automatic, pneumatic piston filler. Machine is capable of 5-100 ml fills. Operates on compressed air and 120 volt single phase power.

Item is a used, automatic, A Pack twin piston filler. The machine was manufactured in 2016. It is designed for the nozzles to mount over an existing conveyor and utilize a pneumatic indexing system. Pistons are driven pneumatically and a rotary valve and nozzle valve are utilized to control product flow. The filling machine is mounted on a S/S frame with and integral control panel. The machine has a All-Flow, 1 inch, S/S, double diaphragm pump that supplies product to the filler reservoir.

Item is a used, Accuteck, single head piston filler. Machine has 100 ml fill cylinder.

Item is a single station piston filler. This is a bench top machine having a single piston with 500 ml capacity. The piston operates off a pneumatic cylinder. The cycle is initiated with a foot switch. 120 VAC is required for the cylinder stop switch.. Machine has S/S hopper and lid and utilizes a rotary style valve.

Item is a used, Biner-Ellison model F52-TD-18 rotary, gravity filler. This is an automatic 18 head filling machine with 52 inch stainless steel dial. The entire drive mechanism is mounted on the top of the machine for easy maintenance. Set up for clockwise (left to right) rotation. The machine is equipped with level control for the reservoir with a separate, stainless steel return tank. Product supply pump is also included. Center to center distance between the valves is approximately 8 1/2 inches. Previous use was in a liquor facility. Machine was utilized very little since previous rebuild.

Item is a used, Mateer, model 3920 auger filler. This is an automatic machine with a full frame and an integral conveyor. It is equipped with Microset controls. The product hopper is equipped with a slow speed agitator. The auger diameter is 2 1/2 inches. The conveyor is equipped with "container vibrator" mechanism. Machine is all stainless steel construction.

Item is a used Cherry Burrell 10 valve rotary filler. This is a fully automatic machine capable of filling gallon containers on each station, but is currently set up for smaller, round containers. The valve diameter is 3/4 inch. There is no capping apparatus on the machine. It is equipped with a straight through conveyor. Stand alone capper can be added at additional cost.