Equipment Found

Item is a used GAI, 12 valve, rotary filler. The machinewas manufactured in 1996 and was originally set up with a "T" top corker which was subsequently removed. There is no corking apparatus on the machine. This is a full frame machine with an integral conveyor frame and feedscrew container infeed. This is a low vacuum assist machine. The product reservoir has had repair, but is fully functional. Previous use was coffee drinks.

Item is a used Cherry Burrell 10 valve rotary filler. This is a fully automatic machine capable of filling gallon containers on each station, but is currently set up for smaller, round containers. The valve diameter is 3/4 inch. There is no capping apparatus on the machine. It is equipped with a straight through conveyor. Stand alone capper can be added at additional cost.

Item is a used, Federal S/S, 26 valve filler set up with a 6 head, preessure pad capper. The machine is equipped with 1 1/8 inch spring style valves (not diaphragm) for hot or cold fill application. The machine was previously running dairy style, plastic, gallon jugs at a bottled water facility. The machine operates from left to right with clockwise rotation.

Item is a used, Federal S/S 18 valve gallon filler with 5 head pressure pad capping turret. Machine operates from left to right (clockwise rotation). It is equipped with 1 1/8 inch, diaphragm style filling nozzles. It was previously utilized in a bottled Water facility and is set up with change parts for dairy style gallon jugs. Power requirement is 230-460 volt/3 phase.

Used 28 valve CEMEC, rotary, gravity filler. Machine is all stainless steel with 28, 1/2 inch valves on 4.5 inch centers. Machine has clockwise rotation. Included with the machine are additional change parts and maintenance parts including valves. the machine was previously utilized in a large beverage/food facility filling tea into glass containers.

Used Pneumatic Scale/Pfaudler 35 station, rotary, piston filler. The machine was manufactured in 2000. It was running a 12 oz. juice concentrate container. It operates with a counter-clockwise rotation and tangential discharge. Included with the machine is 6 foot long infeed conveyor. It is equipped with straight cut, teflon coated rotary valves and the NO CONTAINER/NO FILL mechanism. The control panel is included and is a two door, stand alone, stainless steel cabinet. Rated capacity is 500 CPM. Electrics are 460 volt, 3-phase.

Used Standard Metals gravity filler/briner. The machine has 24 valves and is currently set up as a briner/finisher for pickle jars. The machine was purchased in 1992 at a cost of approximately $95,000. It was used for 4 months and removed from service. The product contact parts of the machine are 316 stainless steel while the frame is 304 stainless steel. It operates from left to right and utilizes a feedscrew infeed. . Maximum bottle diameter is 6 inches. The machine is capable of production rates of up to 250 cpm on quarts. The machine needs the fiberglass product reservoir. If the machine was to be used to fill small neck bottles, a new set of filling nozzles would have to be manufactured. The machine was originally set up for hydraulic drive, but could be converted to electric.

Used Horix, model HA-20 Hytamatic filler. The machine was manufactured in 1980. This is a pressure filler utilizing a level sensing, no contact valve for highly accurate fills. Valve operation is pneumatic. Machine is equipped with no container/no fill and no container/no blow down capability. The pitch diameter is 48 inches and the machine is capable of filling a container of 6.5 inch diameter at each station. The machine was previously running maple syrup and a lemon concentrate at a major food company. Included with the machine is an extensive selection of spare maintenance parts and the manual. There are six sets of change parts which include two 12 oz., 15 oz., 24 oz., 32 oz., and a set for 2 liter. Machine operates from left to right and is currently set up for 460 volt 3 phase power.