Select an industry below to view its inventory list:

For equipment across industries, simply return to our equipment finder on the home page:

New Search

Ager Tank &
Equipment Co.

PO Box 10688
Portland, OR 97296

Phone: (503) 222-7079
Fax: (503) 222-7459

Contact Us

Equipment Found

Page 1 of 46 out of 364 total items

You searched for:

category Winery

Image Item # Name Category
Used G&D 3hp 1Phase glycol chiller 7838 Used G&D 3hp 1Phase glycol chiller Winery, Brewing, Beverage more info
(1) available - Used G&D 3hp single phase 230v glycol chiller. This unit was recently traded in on a larger machine. It has been refurbished/run tested at the factory and is ready to go. Specifications include: Package consists of the following: -1 complete refrigeration circuit -Engineered high efficiency heat exchanger for maximum energy savings -Glycol pump -Dynamic Fluid bypass valve -Insulated stainless steel glycol reservoir with level indicator and aux ports -All insulated copper piping -ETL 508A listed complete control panel w/single point electrical connection, breakers , starters & safety switches -High and low pressure controls -Freeze stat safety switch -High temp alarm -Low ambient control -Anti cycle timer to prevent short cycling of compressor -On/pump down/off switch -Single Stage Digital temperature controller for simple operation -Fully powder coated steel frame -Powder coated aluminum housing -Rated for outdoor use -Louvered access panels for easy service and maintenance -Factory-Run tested and fully charged w/ refrigerant Machine is crated and ready to ship from our Portland Oregon location.
Used G&D 3hp chiller - 2018 -3ph 7837 Used G&D 3hp chiller - 2018 -3ph Winery, Brewing, Beverage more info
2 available -Used G&D 3hp glycol chiller, built in 2018 and recently traded in on a larger unit. This machine has been refurbished/run tested by the manufacturer. Specifications include: -1 complete refrigeration circuit -Engineered high efficiency heat exchanger for maximum energy savings -Glycol pump -Dynamic Fluid bypass valve -Insulated stainless steel glycol reservoir with level indicator and aux ports -All insulated copper piping -ETL 508A listed complete control panel w/single point electrical connection, breakers , starters & safety switches -High and low pressure controls -Freeze stat safety switch -High temp alarm -Low ambient control -Anti cycle timer to prevent short cycling of compressor -On/pump down/off switch -Single Stage Digital temperature controller for simple operation -Fully powder coated steel frame -Powder coated aluminum housing -Rated for outdoor use -Louvered access panels for easy service and maintenance -Factory-Run tested and fully charged w/ refrigerant Both units are crated and ready for shipment from our Portland, OR location. Price is per unit.
(2) available -  Used 15 bbl MBC Conical Fermenters 7831 (2) available - Used 15 bbl MBC Conical Fermenters Winery, Brewing, Beverage more info
2 Available - These are 15 bbl used MBC Brewing conical fermenters. They are desigend with jackets on te cone and sidewall, side manway doors, 60 degree conical bottoms with racking ports and bottom discharge. They are outfitted with dry hop ports on top, cip, prv, and valves/fittings. They were last used in a brewery and are represented in very good codition. Price is per tank.
Accumulation Conveyor 7830 Accumulation Conveyor Winery, Water, Pharma, Petro, Food, Brewing, Beverage more info
Item is a used, mattop accumulation conveyor measuring 18" wide by 9 feet long. The frame and legs are S/S. Currently set up with guide rails and the drive motor on the right side discharge.
(3) available - Used 80 bbl Premier Stainless Fermenters 7829 (3) available - Used 80 bbl Premier Stainless Fermenters Winery, Brewing, Beverage more info
(3) available - These are used Premier Stainless 80 bbl conical unitank fermenters. These tanks were built in 2019 and removed from service April 2022. They are in excellent condition and include three zone cooling, side manway door, cip, racking port, dry hop port, and 4 legs with cross braces and adjustable footpads. They are ready to ship from our Portland, Oregon facility. Price is per tank.
42 7827 42" ROTARY ACCUMULATION DISK Winery, Water, Pharma, Petro, Food, Brewing, Beverage more info
Item is a used, Inline Packaging Systems, 42" diameter, S/S, rotary accumulation table. This table is designed as a "pack-on" table with a built-in dump table.to accommodate the dumping of containers from the cartons and pushing them onto the feed disk which powers them onto the conveyor. The disk is powered with a 1/8 HP, DC drive gearhead motor providing variable speed capability..
Inline Packaging Systms Rinser 7825 Inline Packaging Systms Rinser Winery, Water, Food, Brewing, Beverage more info
stem is a used, Inline Packaging Systems model RSC, 8 head, liquid container rinser. The machine counts, grips, and inverts the containers over a nozzle manifold and recovery tray, and discharges water into the container hitting the bottom of the container. Rinse and drain times are adjustable.. The bottles are then rotated back to their original up -right position and discharged on the conveyor to the filler.. Conveyor is 4 1/2" wide by 10' long. Touch pad controls. 120 volt/single phase power requirement
wild goose 600+ canning line 7822 wild goose 600+ canning line Winery, Water, Brewing, Beverage more info
The item is a used, Wild Goose 600+, carbonated/still product canning line. The line includes a SKA Fabrication, fully automatic, small footprint can depallaetizer. This machine is set up with left side discharge. Discharge is onto side-by-side twist/rinse chutes for 12 oz. and 16 oz.202x211 cans. Cans are fed into the Wild Goose,model 600+, dual lane filler/seamer having 4 fill heads and one seamer head per lane. After filling/seaming cans are conveyed through a pair of Carleton plate inverters where the bottom of the can is coded with a non contact, Hitache ink jet coder (at this point I am not sure if the Hitachi coder is included in the package). After coding, cans are conveyed through a Pack Leader model 501 pressure sensitive labeler having #4 wind. The conveyor on this machine is utilized with the labeling head turned off when pre-decorated cans are being packaged. The cans than enter the Pak Tech mod. 120/180 machine where the plastic over-cap/carrier is applied to form 4 and 6 packs of cans. There is a minimal amount of conveyor in this line and it takes up very little space. The line ran at 85-90 CPM.

Page 1 of 46 out of 364 total items

Revise Search